How to Fix the Parameter Is Incorrect Error on Windows 11 (2024)

Readers help support Windows Report. We may get a commission if you buy through our links.

Read our disclosure page to find out how can you help Windows Report sustain the editorial team Read more

Are you suddenly getting the parameter is incorrect error on Windows 11? This article will give you the proper solutions to get rid of this problem permanently.

Any PC user may encounter this problem at any time. This issue may come in different ways. Some users face this problem at the start-up, some while accessing specific disk drives. When this error appears, you may see similar messages like the following ones:

There was a problem starting. The parameter is incorrect

See Also

7 Ways To Fix “The Parameter Is Incorrect” ErrorGetting “The Parameter is Incorrect” Error in Windows 10? 5 Ways to FixHow to Fix "The Parameter Is Incorrect" Error in WindowsTop 6 Ways to Fix The Parameter Is Incorrect Error on Windows 11

Location is not accessible. The parameter is incorrect

Sometimes, it may appear with an error code: 0x80070057.

What causes the parameter is incorrect error?

Usually, this problem occurs due to the following things:

• Pending update: Pending updates are very common reasons some specific PC users face this problem.
• Problematic disk drive: Bad sectors or other errors with disk drives also may cause this issue.
• Corrupted system files: Problematic system files are responsible for many problems, including this error.
• Permission issue: If you don’t have proper permission to access a drive, this problem may appear.
• Malware: Virus or malware problems are a very common and old reason for this type of issue.
• Incorrect settings: In some cases, incorrect configuration of specific settings may lead you to this type of problem.

How can I solve the parameter is incorrect error?

You may feel lucky that you can easily overcome this annoying problem. However, before going through the troubleshooting steps, we strongly recommend you do the following things:

• Install any pending Windows updates.
• Scan for viruses and solve any malware problems. Check out these best antivirus and antimalware programs for Windows 11.

After ensuring the above things, go through these methods to troubleshoot the parameter is incorrect error on Windows 11.

1. Run chkdsk

1. Open This PC.
2. Right-click on the problematic disk drive and go to its Properties.
3. Go to the Tools tab.
4. Click on Check under the Error checking section.
5. Click on Scan drive on the popup window.
6. Wait until Windows finishes the process.

2. Repair system files

1. Press Win + X on the keyboard and choose Terminal (Admin).
2. Type the following command and hit Enter to execute it: sfc /scannow
3. After finishing, run the following commands one by one: DISM /Online /Cleanup-Image /CheckHealth
DISM /Online /Cleanup-Image /ScanHealth
DISM /Online /Cleanup-Image /RestoreHealth
4. Restart your PC.

If any system file corruption causes the problem, doing the above things will solve the parameter is incorrect issue on Windows 11.

3. Format the drive

1. On This PC, right-click on the problematic drive and choose Format.
2. Click on Start.
3. Wait for a while to finish the process.

If you have the necessary files in the specific drive or folder, you should skip this method. Consider taking a backup on another device if it is an external drive.

4. Change the decimal symbol

1. Open the Start Menu, type control panel, and hit Enter.
2. Go to Clock and Region.
3. Click on Region.
4. Next, under the Formats tab, click on Additional settings.
5. Set the decimal symbol is set to “.” if it is different.
6. Save the settings and restart your PC.

If somehow the decimal symbol gets altered by you or anything else, you may face the problem. According to a significant number of users, correcting the symbol has fixed the parameter is incorrect problem.

5. Clean boot

1. PressWin+Ron the keyboard to openRun.
2. Type the following command and pressEnter:msconfig
3. Next, go to theServicestab.
4. CheckHide all Microsoft Servicesand click onDisable all.
5. Click onOK.
6. At last, restart your PC.

If you don’t see the error in the clean boot state, it means a third-party service was causing the problem. In this case, enable the services one by one until you find the culprit. Then, you can keep it disabled or remove related software from your PC.

6. Modify the registry

1. On Start Menu, type regedit and press Enter.
2. Now, navigate to the following location: Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsUpdate\UX
3. Double-click on IsConvergedUpdateStackEnabled.
4. Set its value to 0.
5. Save it.
6. If it doesn’t work, go to the following location: Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\SystemCertificates
7. Create a new DWORD (32-bit value) and name it as CopyFileBufferedSynchronousIo.
8. Set its value to 1.
9. Save it and restart your PC.

If this method does not work, undo the changes you have made. However, in most cases, it should solve the parameter is incorrect error on Windows 11.

But, if you are unlucky, the problem may still persist. In this case, we suggest you connect the disk drive to another PC and see if it works. Also, verify if it is physical damage or not. You also can consider resetting Windows or doing a clean installation.

The above methods should solve the parameter is incorrect error on Windows 11 PC. Do you have a suggestion or opinion on this topic? You can write it in the comment box.

Hasibul Kabir is a Tech-Enthusiast Blogger, Web Developer & Hobbyist Game Developer. Writing about Technology, mainly Windows, Mac, iOS, etc., is his main focus, besides doing some computer science-related work.He loves exploring new technology and presenting it with simple words to the audience. When not at work, Hasibul plays video games, explores nature, tastes delicious foods, or learns new things.